10 ways to save energy

Upgrade your HVAC system

The HVAC system is made up of heating, ventilation, and air conditioning equipment. Heating alone accounts for more than 40% of home energy consumption. Because homes in the northern regions are affected by the coldest temperatures during the year, ENERGY STAR gases have different meanings in the northern and southern parts of the United States.

Progress in “U.S. Southern Certificate ”ENERGY STAR can save up to 12% on your heating bill, or an average of $ 36 per year. ENERGY STAR factories in the northern part of the U.S. Written by the standard label ENERGY STAR and up to 16% more power than basic models. This translates into an average savings of $ 94 per year on your North U.S. heat bill.

Air conditioning, by comparison, is not a significant contributor to energy costs - on average, we make up only 6 percent of the energy used in your home. Medium ventilation devices are eight percent more efficient than conventional models. Ventilation systems are often combined with heating systems, which means you have to buy your new furnace and air conditioner at the same time to ensure that the air conditioner is very efficient at energy efficiency.

Upgrading to the third part of the HVAC system - low wind - can also improve your energy efficiency. The ventilation system is built with a network of pipes, which carry hot and cold air throughout your home. If these pipes are not properly closed or secure, the resulting energy waste can add hundreds of dollars to your annual heating and cooling costs. Separating and maintaining your ventilation system can reduce your heating and cooling costs by up to 20%.

9. Weather weather in your home

The weather, or closing the air leak around your home, is a great way to reduce your heating and cooling costs. The most common sources of air leaks in your home are the edges, windows and doors. To prevent this leak, you should make sure that there are no cracks or openings between the wall and the air, window, or door frame.

To close air leaks between standing objects, such as a wall and window frame, you can install a caulk. By cracking between moving objects, such as windows and usable doors, you can incorporate weather forecasts. Climate control and self-regulation are simple ways to close the gap that offer investment returns in less than a year. Air leaks can also occur by opening walls, floors, and roofs from pipes, plumbing, or electrical wiring.

Leakage of air from your home usually from the inside of the house into your roof with a small opening. Whether because of the plumbing, the lighting, or the roof, the hot air will rise and run in small spaces. Since the natural flow of heat from warmer climates to cooler spaces, these small spaces can make your building temperature much higher if your attic is not adequately protected. To reap the full amount of savings from the weather, you should consider protecting your home completely.

10. Protect your home

Ventilators play a major role in reducing your utility bills by keeping warm during the winter and keeping heat out of your home in the summer. The recommended temperature resistance, or "R value," of your installation depends on where you live. In warmer climates, the recommended R value is much lower than in arid buildings such as the northeast.

The level of installation should be installed depending on the location of your home. Your attic, walls, floor, foundation, and crawlspace are the five main areas where you should consider adding partitions. Use the Home Energy Saver tool to get recommendations based on the details of your home, or find common regional recommendations on the Department of Energy's web closure.